Leather Protection
Nilrust Leather Protection coats and protects your vehicle’s interior leather surfaces.
It is a specialised emulsion containing silicates and plasticisers which rejuvenate and give treated surfaces added protection from shrinkage, cracking, splitting and discolouration caused by harmful effects of ultra violet light.
- Available in both a gloss or satin finish
- Conditions the leather
- Improves water repellence on leather
- Improves cleanability – just wipe with a cloth
- Retains the soft feel to vinyl and leather
- Covered by a Limited Lifetime Warranty for new vehicles (conditions apply)
Nilrust Plastic, Vinyl & Leather Protection – Available in kit form
Nilrust Plastic, Vinyl & Leather SATIN Protection – Available in kit form
Nilrust Leather Cleaner – Available in 250ml Bottles
Nilrust Leather Restorer – Available in from 125ml Bottles
NILRUST LEATHER CLEANER – Stage 1
Description: LEATHA Cleaner stage 1 is a biodegradable concentrated formula based on natural orange extract designed for use on leather surfaces. Leatha stage 1 contains selected surfactants, water soluble solvents and alkali salts to give an all round performance. Designed to work in conjunction with Leatha stage 2.
- Typical Properties: Light orange coloured clear liquid, orange odour.
- Specific Gravity: 1.00@20oC
- Volatiles: 96%
- Flash Point: NA
- Solvent: Infinitely dilutable
- Drying time: NA
- Clean up: Clean up with water.
Safety: Refer to Material Safety Data Sheet for detailed information. Always ensure personnel protection consisting of adequate ventilation and eye, skin protection are observed.
Conforms to AS2662/1 Department of Defence Material Testing Laboratory Report 91/0767.
NILRUST LEATHA RESTORER
Description: NILRUST LEATHA RESTORER should be applied to leather upholstery which has begun to wear and the original coating has begun to deteriorate. LEATHA also cleans the surface during the initial application, and accumulated grime is removed during the removal of the excess material.
- Typical Properties: Light yellow low-medium viscosity fluid. Combination of sulphonated oils
- Specific Gravity: NA
- Volatiles: NA
- Flash Point: NA
- Solvent: Non-soluble in water
- Drying time: 10-15 minutes under normal conditions.
Clean up: Clean up with water while wet, but after drying will only be removed with the assistance of a petroleum based solvent e.g. white spirit or mineral turps.
Safety: Refer to Material Safety Data Sheet for detailed information. Always ensure personnel protection consisting of adequate ventilation and eye, skin protection are observed.