Chemical Rustproofing

Nilrust Chemical Rustproofing stops rust from forming and retards further oxidation of any minor rust already present.

General Details
Nilrust Rust Proofing is not a simple wax / solvent based product (as most other products are). In addition to waxes, there are resins, sulphinates, penetrating oils and calcium soap which gives a very high resistance to salt spray. This stops rust from forming and retards further oxidation of any minor rust already present.

  • Products are manufactured and tested to conform to standard AS2662/1
  • This sealant is applied inside doors and body panels and to all vulnerable areas including the vehicles under body protecting the chassis and vital safety components such as brake and fuel lines from corrosion
  • We do not use recycled solvents or mineral turps
  • The sealant is a highly advanced chemical compound which mists to penetrate seams and joins leaving a flexible protective coating, locking out moisture and other corrosion forming compounds
  • Backed by a Limited Lifetime Warranty on new cars and a 5 year warranty on new commercial vehicles & 4WD’s
Product List
Chemical Rustproofing Product List

Nilrust Bottomside – Anti-corrosion product, manufactured for the application to under body sections of motor vehicles.

Nilrust Topside – Anti-corrosion product, manufactured for the application to upper body sections and concealed box sections of motor vehicles.

Standard Wax

Nilrust Waxcote Topside

Nilrust Waxcote Bottomside  

Premium Wax Resin Range  

Nilrust Bottomside Water Based –  (environmentally friendly)

Nilrust Topside Water Based

 

 

Systems available for Mine spec and Building/Construction

Technical Info
Chemical Rustproofing Technical Information

NILRUST BOTTOMSIDE

Description:  Nilrust Bottomside is the name given to the C.A.R. anti-corrosion product, manufactured for the application to under body section of motor vehicles.  The product is a thixotropic, black-brown material, based on selected organo-metallic complexes, waxes  oils, and bitumen. Drying by solvent evaporation, to give a tough protective coating.  The product has been formulated to give excellent atomisation with a fogging attachment, particularly with low pressure systems.Typical Properties:  (Not a specification).  Product viscosity 120 – 130 angular degrees. Gallenkamp VSO20 thixotropic viscometer (swg 30, cylinder 16.67mm) which calculates to 5000 – 5500 mPa.s.

  • Specific Gravity:      @ 25C:  1.06
  • Non-Volatiles:    51 – 53% w/w    Typical 52%
  • 34 – 36% v/v    Typical 35%
  • Flash Point:    38C
  • Solvent:    Selected petroleum fractions.
  • Colour:    Black.

Quality Control:  All production is filtered through 210 micron filters and standardised to a viscosity prior to packaging.  Random solids tests are run on a regular basis for cross checking.

Application:

Recommended thickness:    100 – 125um dry.

Drying time:  Flow ceases within 30 minutes under normal conditions, but full drying time will take several days, depending on thickness of film and drying conditions.

Clean up:  Mineral turps or white spirits are suitable solvents to clean up overspray and drips.

Safety:  Refer to Material Safety Data Sheet for detailed information.  Always ensure the product is used with flash-proof equipment, and personal protection, consisting of adequate ventilation, ensuring eye and skin protection is observed at all times.

Conforms to AS2662/1 Department of Defence Material Testing Laboratory Report 91/0767.

 

NILRUST TOPSIDE

Description:  Nilrust Topside is the name given to the C.A.R. anti-corrosion product, manufactured for the application to upper body section and concealed box sections of motor vehicles.  The product is a thixotropic, semi-transparent material, based on selected organo-metallic complexes, waxes and oils, drying by solvent evaporation, to give a soft protective coating.  The product has been formulated to give excellent atomisation with a fogging attachment, particularly with low pressure systems, and good seam penetration.Typical Properties:  (Not a specification).  Product viscosity 330-335 angular degrees .. Gallenkamp VSO20 thixotropic viscometer (swg 30, cylinder 16.67mm) which calculates to 260-300 mPa.s.

  • Specific Gravity:      @ 25C:  0.85
  • Non-Volatiles:    49 – 51% w/w    Typical 50%
  • 45 – 47% v/v    Typical 46%
  • Flash Point:    38C
  • Solvent:    Selected petroleum fractions.
  • Colour:    Golden brown.

Quality Control:  All production is filtered through 100 micron filters and standardised to a viscosity prior to packaging.  Random solids tests are run on a regular basis for cross checking.

Application: Recommended thickness:  75 – 100um dry.

Drying time:  Flow ceases within 30 minutes under normal conditions, but full drying time will take several days, depending on thickness of film and drying conditions.

Clean up:  Mineral turps or white spirits are suitable solvents to clean up overspray and drips.

Safety:  Refer to Material Safety Data Sheet for detailed information.  Always ensure the product is used with flash-proof equipment, and personal protection, of adequate ventilation, ensuring eye and skin protection is observed at all times.

Conforms to AS2662/1 Department of Defence Material Testing Laboratory Report 90/1151

Order Enquiry
Contact form description text

  • 8 + 76 =